After the renovation or new build
Post Construction Cleaning in Tampa, FL
When the contractor leaves, the dust stays. A post-construction clean takes drywall dust, sawdust, paint overspray and stickers out of every surface so the space is ready to live in.
What does post-construction cleaning include?
Post-construction cleaning removes fine dust, debris and residue left by building or renovating: drywall dust on every ledge, sawdust in corners, tape and stickers on windows, and film on floors and fixtures. It is a different job from regular cleaning, and it takes longer. Because every site is different, we set the quote after we see the space or photos.
- Dust wiped from walls, ledges, trim, doors and fixtures
- Windows, frames and tracks cleaned, stickers and tape removed
- Cabinets cleaned inside and out
- Floors vacuumed and washed, with care on new finishes
- Vents, grilles and returns wiped
- Bathrooms and kitchens cleaned and sanitized
- Light fixtures and fans dusted
What post-construction cleaning does not include
Clear limits avoid surprises on the day. The following usually sit with the contractor.
- Hauling away building debris, packaging and large waste
- Heavy scraping of paint, stucco, grout haze or adhesive that needs a special tool
- Pressure washing, exterior work or landscaping
- Repairs, touch-up paint or fixing damage
- Hazardous materials such as asbestos, lead or mold remediation
Rough clean, final clean, touch-up
| Stage | When | What it covers |
|---|---|---|
| Rough clean | During or right after the main work | Removes debris and the heaviest dust so other trades can finish |
| Final clean | After the punch list is done | Detail cleaning of every surface so the space is ready to move in |
| Touch-up | After the final inspection or move-in prep | Picks up what settled since, such as fresh dust or fingerprints |
Most homeowners book a final clean, and some contractors schedule a rough clean as well. Tell us which stage you are at.
Tampa conditions and fine dust
Drywall dust is very fine and travels. In a closed home with AC running it settles on vents, in tracks and on the top of cabinets and doors, so a clean that looks done on day one shows a film on day three. Humidity can make the paste of dust and moisture harder to wipe off, so we clean from high to low and wipe with damp cloths.
Change the air filter after the clean, and ask your contractor whether vents were covered during work. If not, the ducts may need attention from an HVAC company.
How to prepare
- Have the contractor remove debris and building materials first
- Tell us the stage: rough, final or touch-up
- Send photos and the square footage
- Make sure water and power are on
- Share the access method and parking
- Say which surfaces are new and need gentle products
What gets cleaned, room by room
Kitchen
Cabinets inside and out, drawers, counters, backsplash, appliance exteriors, sink and fixtures. Dust that landed on the tops of cabinets and in the range hood gets wiped last.
Bathrooms
Vanity, mirror, tub, shower glass, fixtures and toilet. Stickers and protective film come off glass and fixtures, and tile grout haze is noted if it needs a specialist product.
Floors
Tile, wood, vinyl and carpet each need a different method. Tell us what is on the floor and whether it is new, because wet methods can damage some finishes before they cure.
Windows, doors and trim
Glass, frames and tracks wiped, tape and stickers removed. Door frames, baseboards and trim are wiped from the top down.
Who books post-construction cleaning
- Homeowners after a remodel, an addition or a new build
- Contractors and builders who want the home turned over clean
- Landlords and investors finishing a rehab before listing or renting
- Business owners finishing a tenant improvement or a new office
Dust, safety and keeping the home usable
Fine dust can irritate eyes and lungs, so keep children and pets out of the space until the clean is done. Open windows if you can, and run the AC with a new filter. If the work involved old materials, such as lead paint or asbestos, those are specialist jobs and are not part of cleaning.
How booking a post-construction clean works
- Send photos and details. Square footage, stage of the job and when the contractor finishes.
- We review. For bigger jobs we walk the site before we quote.
- You get a written quote. It names the scope, the visits and the expected hours.
- We clean on the agreed day. You inspect the space and tell us what to fix.
What changes a post-construction cleaning quote
- Square footage and number of floors
- Scope of the work done and how dusty it was
- Stage of cleanup: rough, final or touch-up
- Number of windows, glass doors and fixtures
- Access and parking
- Whether a second visit is needed
Questions people ask
How much does post-construction cleaning cost?
It depends on the size of the space, the type of work done and how much dust there is. We usually need photos or a walkthrough before we quote.
How long does it take?
It takes longer than a regular clean. A final clean of a home is often a full day or more depending on size.
Do you remove construction debris?
No. Debris removal and hauling belong to the contractor. We clean what is left.
When should I book it?
After the main work and the punch list are finished and before you move in.
Will the dust come back after the clean?
Some settles in the first days, especially if the AC is running. A touch-up visit picks it up.
Do you clean windows and track after a renovation?
Yes. Stickers, tape and film come off glass, and tracks are vacuumed and wiped. Paint scraping from glass is not included.
Ask for your quote
Tell us what needs cleaning and when. We reply with a written quote for your address. If your ZIP code is not on our list, put it in the form and we tell you whether we can reach it.